The DJ PRE II acts as an interface between your turntable and your recording/playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable rumble while leaving the audio pristine. The front gain trim control and signal/clip LED allow you to optimize the preamp's gain for a wide range of input sources. The built-in low noise phono preamp circuitry is highly accurate and precisely conforms to the RIAA standard. The line output jacks are low impedance and can be used with any sound card

The ProMIX mixes three microphones into a transformer-balanced output witha robust feature set. Each of the three XLR inputs has switchable phantom power, low cut switches, and level control. The unit also has 1/4" AUX/Headphone output and clipping meters. The ProMIX can also run on 2 9V batteries. Specs:

• Maximum Gain: +60dB
• Input Impedance: 600 ohms
• Maximum Input Level: -14dB
• Maximum Output Level: +14dB
• Output Impedance: 600 ohms
• Total Harmonic Distortion: 0.0002
• Low Cut: -3dB @ 100Hz
• Clip Headroom: 3dB
• Output Phantom Power: 12V DC
• Power: 12V DC (adapter) / 2x 9V (batteries)
• Dimensions: 5.625x3.75x1.75 inches (143mm x 92mm x 45mm)
• Weight: 1.5lb (680g)

We can beat any advertised price - call or email for details. Includes Free Shipping (US only)

The PowerMix III is a three-channel true stereo line mixer. Each channel features a level and pan ("balance") control. It accepts either mono or stereo signals, and mixes them down into stereo or identical L/R mono signals. It has a added master level control which controls output volume and a headphone level control for the two headphone outputs. All inputs are 1/4" unbalanced. Specs:

• Maximum Gain: +27dB
• Input Impedance: 10k ohms
• Maximum Input Level: +30dB
• Maximum Output Level: +13dB
• Output Impedance: 100 ohms
• Total Harmonic Distortion: > 0.005%
• Power: 12V DC (Adapter included)
• Dimensions: 5.625x3.75x1.75 inches (143mmx92mmx45mm)
• Weight: 1.3 lbs (590g)

We can beat any advertised price - call or email for details. Includes Free Shipping (US only)

The ART DTI is a high quality passive audio interface that uses a pair of high performance transformers to totally separate input and output signal grounds, thereby isolating two systems and reducing hum and ground-loop noise. The DTI's audio transformers have an extremely flat and wide frequency response and can handle high signal levels while maintaining an isolated balanced output. This gives the DTI a very clean and neutral sound with a wide variety of signal sources. The transformers are wound for 1:1 unity gain and are designed to be used with impedances from 600 to 100KΩ
We can beat any advertised price - call or email for details. Includes Free Shipping (US only)

The Xdirect is an active DI box which converts low level signal sources (instruments or microphones) to high level low impedance isolated outputs

The Zdirect is a passive DI box that allows you to connect instrument, line, or speaker level outputs to mixers or other balanced inputs thru a high performance audio isolation transformer

The easiest way to directly connect an electric guitar (or other musical instrument with a mono 1/4" jack) to your computer for convenient recording with no other equipment needed. Provides studio quality 16-bit 44.1KHz or 48KHz digital audio. No special drivers are required, just "plug and play" with your Windows or Mac PC