These produce a sound that is pure Grado, with warm harmonic colors, rich full bodied vocals, excellent dynamics, and an ultra-smooth top end. Handmade in Brooklyn NY. They have a distinctive classic style and an open air design. While the open-back design of the earcup is not good for noisy environments, all reviewers indicate that they sound exceptional and are comfortable to wear for long periods. The components of Grado's e Series have been upgraded to optimize their performance over recent models. Improved housings, rhodium plating, and symmetrically tuned magnets produce an accurate, high-fidelity listening experience. Highlights: Vented diaphragm, Made in the USA, Non-resonant air chamber, Copper voice coil wire and connecting cord, Famous Grado sound with drivers matched to 0.1 dB.

Specifications:

• Style: Over-the-ear Typical Use: Hi-fi / Portables
• Transducer type: Dynamic, matched to 0.1 dB
• Operating principle: Open air
• Frequency response: 20-20K Hz
• SPL: 99.8dB/mW
• Impedance: 32 ohms
• Cord length: 7 ft. (2m)
• Connector type: 1/8" (3.5 mm)
• Weight: 0.75 lbs

INCLUDES 1 Pair of Headband Style SR80e Headphones, Screw on 1/4" (6.5 mm) Gold Plated Adapter,  Replaceable Ear Pads, 1-year Manufacturer Warranty
We can beat any advertised price - call or email for details. Includes Free Shipping (US only)

The Grado SR60e's, handmade in Brooklyn, NY, are your entry to the world of full spectrum audio. Grado is famous for producing a powerful, tight bottom end, world-renowned midrange, warm harmonic color, rich full bodied vocals, excellent dynamics and an ultra smooth top end. These headphones make the pure Grado sound signature available to everyone. You won't find better quality sound at a comparable price point elsewhere.

These Prestige series headphones have a distinctive classic style and an open air design. While the open-back design of the earcup isn't good for noisy environments, these headphones are revered for their exceptional sound and comfort. The ear cushions are designed to be replaceable, which is a handy feature that will extend the life of your headphones significantly.

Highlights:

• Vented diaphragm (open-air) for spacious, low-distortion sound and extended bass response
• Adjustable headband
• Non-resonant air chamber
• Copper voice coil wire and connecting cord
• Famous Grado sound with drivers matched to 0.1 dB

Specifications:

• Style: On-the-ear
• Typical Use: Hi-fi / Portables•
• Transducer type: Dynamic, matched to 0.1 dB
• Operating principle: Open air
• Frequency response: 20-20,000 Hz
• SPL: 99.8 dB/1 mW
• Impedance: 32 ohms
• Cord length: 7 ft. (2 m)
• Connector type: 1/8(3.5 mm)
• Weight: 8.2 oz.

Included: 1 Pair of Headband Style SR60e Headphones with Cable, Screw-in 1/4 (6.5 mm) Gold Plated Adapter, 1-year Manufacturer's Warranty
We can beat any advertised price - call or email for details. Includes Free Shipping (US only)

The Blizzard Wicicle is about the size of a standard XLR connector and allows you to run 7 different frequency groups, each with 512 auto-assigning frequencies, completely free of interference. Each unit is reliable up to 1000 feet at line-of-sight. A color coded LED on the Wicicle lets you know what group it is assigned to. It has an internal antenna and a frosted semi-transparent end cap which illuminates in a different color per group

Specifications:

• Transmission band: 2.4Ghz ISM (2.4-2.525Ghz)
• Channels: 512
• Frequency Groups: 7
• Transmitter power: 20dBm
• Receiver sensitivity: -94dBm
• Power Supply: 5VDC, 500mA (adapter included)

We can beat any advertised price - call or email for details. Includes Free Shipping (US only)

The Blizzard Wicicle is about the size of a standard XLR connector and allows you to run 7 different frequency groups, each with 512 auto-assigning frequencies, completely free of interference. Each unit is reliable up to 1000 feet at line-of-sight. A color coded LED on the Wicicle lets you know what group it is assigned to

Specifications:

• Transmission band: 2.4Ghz ISM (2.4-2.525Ghz)
• Channels: 512
• Frequency Groups: 7
• Transmitter power: 20dBm
• Receiver sensitivity: -94dBm
• Power Supply: 5VDC, 500mA (adaptor included)

We can beat any advertised price - call or email for details. Includes Free Shipping (US only)

The ProMIX mixes three microphones into a transformer-balanced output witha robust feature set. Each of the three XLR inputs has switchable phantom power, low cut switches, and level control. The unit also has 1/4" AUX/Headphone output and clipping meters. The ProMIX can also run on 2 9V batteries. Specs:

• Maximum Gain: +60dB
• Input Impedance: 600 ohms
• Maximum Input Level: -14dB
• Maximum Output Level: +14dB
• Output Impedance: 600 ohms
• Total Harmonic Distortion: 0.0002
• Low Cut: -3dB @ 100Hz
• Clip Headroom: 3dB
• Output Phantom Power: 12V DC
• Power: 12V DC (adapter) / 2x 9V (batteries)
• Dimensions: 5.625x3.75x1.75 inches (143mm x 92mm x 45mm)
• Weight: 1.5lb (680g)

We can beat any advertised price - call or email for details. Includes Free Shipping (US only)

The PowerMix III is a three-channel true stereo line mixer. Each channel features a level and pan ("balance") control. It accepts either mono or stereo signals, and mixes them down into stereo or identical L/R mono signals. It has a added master level control which controls output volume and a headphone level control for the two headphone outputs. All inputs are 1/4" unbalanced. Specs:

• Maximum Gain: +27dB
• Input Impedance: 10k ohms
• Maximum Input Level: +30dB
• Maximum Output Level: +13dB
• Output Impedance: 100 ohms
• Total Harmonic Distortion: > 0.005%
• Power: 12V DC (Adapter included)
• Dimensions: 5.625x3.75x1.75 inches (143mmx92mmx45mm)
• Weight: 1.3 lbs (590g)

We can beat any advertised price - call or email for details. Includes Free Shipping (US only)

Receives DMX512 data via wireless transmission from Sunsonic wireless transmitters. This is an extra receiver for use with a transmitter (not included).  Includes AC power adapter
We can beat any advertised price - call or email for details. Includes Free Shipping (US only)

Stereo balanced 1/4" TRS to XLR female adapter

Chain two 1/4" stereo (balanced) cables together or use it as a go between for any number of combinations

Essential adapter for plugging 1/4" headphones into 1/8" stereo jacks on laptops, music players, etc

6" RCA to RCA Y-Cable Audio Adapter.  Shielded Y-cables, Black PVC jacket, Fully molded nickel-plated RCA plugs.  Useful for going from one RCA output to multiple inputs on other equipment

Common adapter used for going from 1/8" headphone plugs to 1/4" stereo headphone jacks commonly found on stereos and mixers.  Yorkville build quality ensures long-term reliable operation. Lifetime free-replacement guarantee

Solid reliability at a low price designed for live, studio and DJ applications. Covered by Yorkville Sound's limited lifetime warranty, all Link Audio Solutions products provide cost effective pro-grade interconnect between audio devices with heavy-duty molded connectors, oxygen-free copper conductors, spiral shielding, and rugged matte finish high-flex cable

SRH550DJ Headphones deliver full-range audio performance, comfort, and durability for DJ use and personal listening. 50mm Dynamic drivers deliver enhanced bass, while padded ear cups with supra-aural design swivel 90 degrees for flexible wearing positions and full isolation. Includes a carrying bag and a threaded 1/4" (6.3mm) gold-plated adapter
We can beat any advertised price - call or email for details. Includes Free Shipping (US only)

Y-Cable with 1/8" TRS to dual Male XLR. Ideal for connecting an iPod, laptop, or similar device to a mixing console

Converts from male XLR to Balanced 1/4 inch male plug

Y-Cable with XLR Female to Dual XLR Male. Designed to connect an XLR output to two XLR inputs

Standard heaphones adapter converts a mini 1/8" stereo phone plug to a stereo 1/4" plug

The PS-6 Popper Stopper is known throughout the recording and post-production communities as the leading tool in pop elimination technology.  A 6-inch diameter highly durable four-layer screen stops plosive consonants while the fully adjustable 14 inch (35.56cm) gooseneck and mic stand clamp ensure flexibility across any number of applications

Secures your handheld microphone to a mic stand safely while providing easy and positive angle adjustments. Compatible with Shure SM58, SM57, and similar models, the A25D is tough enough to withstand the heaviest use while allowing you to position your mic where you need it. This break-resistant plastic clip includes an adjustable swivel that can be tightened to stay put in studio or stage instrument-miking situations, or loosened enough to allow multiple singers or speakers to change mic angles easily